NCC 2022 Volume Two - Building Code of Australia Class 1 and 10 buildings
Search the National Construction Code editions
List of NCC Specifications
Table 1 sets out the number and title of each NCC Specification, along with the clauses in each NCC Volume that refer to the Specification.
Spec no. | Title | References | |
---|---|---|---|
Vols. One, Two and Housing Provisions | Vol. Three | ||
1 | Fire resistance of building elements | A5G5; A5G6; C4D15; S2C1; S9C2 | A5G5; A5G6 |
2 | Description of materials referred to in Specification 1 | A5G5; A5G6; C4D15; S1C2; S9C2 | A5G5; A5G6 |
3 | Fire hazard properties (determination) | A5G6 | A5G6 |
4 | Design of buildings in cyclonic areas | B1D3 | - |
5 | Fire-resisting construction | C2D2; C2D10; C3D6; C3D8; C3D9; C3D10; C3D11; C3D13; C4D6; C4D8; C4D13; C4D15; D2D13; E1D5; G3D6; S17C11; S18C4; S31C3 | - |
6 | Structural tests for lightweight construction | B1D4; C2D9; S5C23; S14C2; S32C2; S32C3; Housing Provisions 9.3.1 | - |
7 | Fire hazard properties (requirements) | C2D11; C2D14; S3C2; S14C2; S19C7; S32C6 | - |
8 | Performance of external walls in fire | C2D12 | - |
9 | Cavity barriers for fire-protected timber | C2D13; C4D16; S5C11; S5C20 | - |
10 | Fire protected timber | S1C2 | - |
11 | Smoke-proof walls in health-care and residential care buildings | C3D6; C3D15; C4D12; E2D11 | - |
12 | Fire doors, smoke doors, fire windows and shutters | C4D5; G3D4; S11C2; S11C3 | - |
13 | Penetration of walls, floors and ceilings by services | C4D15 | - |
14 | Non-required stairways, ramps and escalators | C2D11; D2D17 | - |
15 | Braille and tactile signs | D4D7; S27C10 | - |
16 | Accessible water entry/exit for swimming pools | D4D11 | - |
17 | Fire sprinkler systems | C1V3; C2D6; C2D13; C3D2; C3D4; C3D7; C3D8; C4D6; C4D7; C4D8; C4D9; C4D12; D2D4; D2D17; E1D4; E2D8; E2D9; E2D10; E2D11; E2D13; E2D14; E2D15; E2D16; E2D17; E2D19; E2D20; G3D1; G3D6; G6D6; I1D2; S5C10; S5C11; S5C14; S5C18; S5C19; S5C20; S5C21; S5C22; S5C24; S7C3; S7C4; S19C11; S20C3; S20C4; S20C5; S31C2 | - |
18 | Class 2 and 3 buildings not more than 25 m in effective height | E1D4; S17C2; S23C1; S23C3 | - |
19 | Fire control centres | E1D14 | - |
20 | Smoke detection and alarm systems | E2D3; E2D5; E2D7; E2D8; E2D9; E2D11; E2D13; E2D14; E2D15; E2D16; E2D17; E2D18; E2D19; E2D20; S5C19; S5C22; S17C8; S18C3; S21C7; S21C8; S22C3 | - |
21 | Smoke exhaust systems | C3D13; E2D10; E2D14; E2D15; E2D16; E2D17; E2D18; E2D19; E2D20; S20C6; S20C8 | - |
22 | Smoke-and-heat vents | E2D10; E2D14; E2D15; E2D16; E2D17; E2D18; E2D19; E2D20; S20C8 | - |
23 | Residential fire safety systems | S18C3; S18C4 | - |
24 | Lift installations | E3D2 | - |
25 | Photoluminescent exit signs | E4D8 | - |
26 | Waterproofing and water resistance requirements for building elements in wet areas | F1D6 | - |
27 | Accessible adult change facilities | F4D12; S15C1 | - |
28 | Sound insulation for building elements | F5D3; F5D4 | - |
29 | Impact sound — Test of equivalence | F5D4; S28C2 | - |
30 | Installation of boilers and pressure vessels | G2D2 | - |
31 | Fire and smoke control in buildings containing atriums | G3D4; G3D8; S14C2 | - |
32 | Construction of proscenium walls | C2D11; I1D3 | - |
33 | Additional requirements | J1V1; J1V2; J1V3; J1V5 | - |
34 | Modelling parameters | J1V3; S35C1 | - |
35 | Modelling profiles | S34C3 | - |
36 | Material properties | J4D3 | - |
37 | Calculation of U-Value and solar admittance | J3D9; J3D13; J4D3; J4D6 | - |
38 | Spandrel panel thermal performance | S37C3; S37C4 | - |
39 | Sub-floor thermal performance | J4D3 | - |
40 | Lighting and power control devices | J7D3; J7D4; J7D5; J7D6; J7D7 | - |
41 | Cross-connection hazards | - | B5D2; B5D3; B5D4 |
42 | House energy rating software | H6D2 | - |
43 | Bushfire protection for certain Class 9 buildings | G5D4 | - |
44 | Calculation of heating load limit, cooling load limit and thermal energy load limit | J1P2; H6P1 | - |
45 | Modelling profiles for J1V5 | J1V5 | - |