Appendices 1-8 This document contains the appendices that are referred to in the Scoping study of Condensation in Residential Buildings.
The National Model Code of Conduct for Building Surveyors sets out minimum obligations for registered building surveyors undertaking statutory functions. It covers four areas:
Fire Code Reform Centre (Project 2) Report, Investigation of Methods and Protocols for Regulating the Fire Performance of Materials with Applied Fire Retardant Surface Coatings was undertaken to in
Fire Code Reform Centre (Project 3) This report, Fire Resistance and Non-Combustibility - Objectives Performance Levels for Fire Resistance, examines the historical bases of the fire resistance pro
Fire Code Reform Centre (Project 6) This Technical Report, Case Studies of Fires in Retail Buildings, deals with case studies of fires in retail buildings that were examined with particular attenti
Fire Code Reform Centre (Project 4) This Technical Report, Response in Fires Database, involved the development of a Fundamental Model, incorporating engineering, risk-assessment methodology and th
This report was prepared for the ABCB by the consultant Philip Chun and Associates.
The purpose of this discussion paper is to provide information regarding current plumbing design principles utilising fixture unit ratings, systems used overseas, the history of the fixture unit an
This report is a study, developed by Turner and Townsend, that investigated the proposed Slips, Trips and Falls Building Codes.
There have been several major building regulatory reforms over the last two decades, this report examines the success of these reforms and identifies future productivity opportunities for the secto
Fire Code Reform Centre (Project 4) This Fire-risk: Summary Report, provides a summary of the development and use of the individual models that make up the Fire-risk model (formerly known as CESARE
Fire Code Reform Project (Project 2) This report, Fire Performance of Floors and Floor Coverings, was undertaken to provide quasi-performance based recommendations to characterise the fire hazard f
Fire Code Reform Centre (Project 4) This Technical Report, Response of Occupants close to Fire, involved the development of a Fundamental Model, incorporating engineering, risk-assessment methodolo
This report provides the data derived from research conducted on the spatial dimensions for occupied manual and powered wheelchairs in Australia.
This report entitled In-building Telecommunications Pathways and Spaces: Outcomes of Analysis has been compiled with the input of the Department of Communications and the Arts and arose from an exa
A Guide to Australian building product conformity has been developed to assist practitioners and business to ensure products and material procured and used in buildings and consultation are ‘fit fo
This report investigates the distortional buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions.
Fire Code Reform Centre (Project 1) This Final Report on the Restructure of BCA-90 Fire Provisions, Volume One was undertaken to restructure the present fire-safety provisions of the BCA into a tab
Fire Code Reform Centre (Project 6) This Technical Report, BCA Fire Safety Requirements for Shopping Centres, involved investigation into factors affecting fire-safety in low-rise, sprinklered shop
Fire Code Reform Centre (Project 4) This Technical Report, Determination of Interface Height From Measured Parameter Profile in Enclosure Fire Experiment, involved the development of a Fundamental