Code
AS/NZS 5065:2005
Name
Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications
Description
Specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications, above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Includes requirements for both plain and structured wall pipes and fittings.
RECONFIRMATION NOTICE
Technical Committee PL-006 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 January 2017.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 13 December 2016.
The following are represented on Technical Committee PL-006:
Association of Accredited Certification Bodies
Australian Industry Group
Energy Networks Association
Engineers Australia
New Zealand Employers and Manufacturers Association (Central)
Plastics Industry Pipe Association of Australia
Plastics New Zealand
Plumbing Products Industry Group
Water New Zealand
Water Services Association of Australia
RECONFIRMATION NOTICE
Technical Committee PL-006 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 January 2017.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 13 December 2016.
The following are represented on Technical Committee PL-006:
Association of Accredited Certification Bodies
Australian Industry Group
Energy Networks Association
Engineers Australia
New Zealand Employers and Manufacturers Association (Central)
Plastics Industry Pipe Association of Australia
Plastics New Zealand
Plumbing Products Industry Group
Water New Zealand
Water Services Association of Australia